TEWIKY / GUIDE

Size Guide

Find your fit with practical measurement guidance, then confirm the dimensions on the specific product page.

Measure First

Use a ruler, flexible tape or a piece you already own.

Compare Carefully

Use the chart as a guide, not a substitute for product dimensions.

Confirm the Product

The exact PDP measurements always take priority.

Use these measurements to choose more confidently, then confirm the dimensions shown on the specific product page. Product-page measurements should take priority for the exact item.

Necklace Length Guide

Length Centimeters Typical Placement
14 in 35.6 cm Close choker fit
16 in 40.6 cm Base of neck / short everyday length
18 in 45.7 cm Classic pendant length near the collarbone
20 in 50.8 cm Below the collarbone
22 in 55.9 cm Upper chest
24 in 61.0 cm Longer layering length

Necklace placement changes with neck circumference, height, body proportions, pendant weight and neckline. Use the table as a visual starting point rather than a guarantee of exact placement.

How to Preview a Necklace Length at Home

  1. Cut a piece of string to the listed necklace length.
  2. Place it around your neck where the chain would sit.
  3. If the style has a pendant, allow for the pendant to hang below the chain line.
  4. Compare the result with the product-page photos and measurements before ordering.

Ring Size Guide — US

US Size Inside Diameter Finger Circumference
4 14.9 mm 46.8 mm
5 15.7 mm 49.3 mm
6 16.5 mm 51.9 mm
7 17.3 mm 54.4 mm
8 18.1 mm 57.0 mm
9 18.9 mm 59.5 mm
10 19.8 mm 62.1 mm
11 20.6 mm 64.6 mm
12 21.4 mm 67.2 mm

Method 1 — Measure a Ring That Already Fits

Choose a ring that fits the intended finger comfortably. Measure the inside diameter straight across the widest part of the circle, not including the metal edge. Compare that millimeter measurement with the chart.

Method 2 — Measure Your Finger

Wrap a narrow strip of paper or non-stretch string around the part of the finger where the ring will sit. Mark where the ends meet, lay it flat and measure the length in millimeters. Compare that circumference with the chart. Do not pull the strip too tightly.

Ring Measuring Tips

  • Measure near the end of the day, when fingers are often slightly larger.
  • Avoid measuring immediately after being very cold or very hot.
  • If your knuckle is noticeably wider than the base of your finger, make sure the ring can pass comfortably over the knuckle.
  • Wider bands often feel tighter than thin bands; if you are between sizes, the larger size may be more comfortable.
  • Measure more than once for consistency.

Bracelet Length Guide

Bracelet Length Centimeters General Fit Direction
6.0 in 15.2 cm Very small wrist / close fit
6.5 in 16.5 cm Small wrist / close to regular fit
7.0 in 17.8 cm Common everyday length
7.5 in 19.1 cm Relaxed fit for many wrists
8.0 in 20.3 cm Larger wrist or looser fit

How to Measure Your Wrist

Wrap a flexible measuring tape around the wrist where you want the bracelet to sit. If you do not have a tape, use a strip of paper or non-stretch string and measure it against a ruler.

  • Close fit: add roughly 0.25 in / 0.6 cm to your wrist measurement.
  • Comfortable everyday fit: add roughly 0.5 in / 1.3 cm.
  • Loose fit: add roughly 0.75–1.0 in / 1.9–2.5 cm, depending on the design.

Chunky bracelets, rigid bangles and charm-heavy designs may fit differently, so use the product-page dimensions as the final reference.

Earring Measurements

Earring size is usually described by dimensions such as hoop diameter, drop length, width or decorative element size. Use stated measurements rather than judging scale from product photography alone.

Adjustable Chains & Extenders

If a necklace, bracelet or anklet includes an extender, check both the shortest and longest wearable length shown on the product page.

Bangles & Rigid Bracelets

Rigid bangles are sized differently from flexible chain bracelets because they must pass over the widest part of the hand or open according to their construction. Use the product-specific inner diameter, opening or circumference measurement shown for the bangle.